I can’t tell, from those part numbers, what you’re doing.
If you’re just doing the angle gear, cool, but you still need to get the anaerobic sealant. You should do the collar sleeve at the same time.
The transmission seal on the driver’s side isn’t hard, but getting the shaft out certainly is.
Current Fleet:
2016 Tundra Crewmax 4WD 1794
2005 MB S600 (126K, Michelin AS4, HPL 0W40)
2005 MB SL600 (55K Michelin AS4, Mobil 1 0W40)
2004 V70R (143K, six speed M66, HPL 5W40)
2004 XC90 (235K, HPL 0W30 Euro)
2002 V70-XC (295K, HPL 0W30 Euro)
2002 V70-T5 (225K, IPD bars, Bilsteins)
2001 V70-T5 (125K, IPD downpipe, cat back and other mods)
1932 Packard Sedan (straight 8, dual sidemounts, original paint and interior, Shell Rotella 15W40)
Bookmarks