Headlamp washer - front skirt removal
Does anyone have a set of instructions / pictures on how to remove the front end in order to replace that dratted power headlamp washer pipe?
My "friendly" dealer after some teeth sucking said the front end has to come off in order to refit the tube. technician says there's no modification to be done - just bung the pipe back on. That means I'll probably have to fix it again later when it's out of warranty...
I notice that there are two half turn lock screws underneath and wonder if I'm being snowed?
It's an MY2009 UK RHD and the pipe is on the LHS.
Any advice, guys?
Thanks,
Mike.
Mine: XC 70 Sport 2009 D5 Inscription Electric Blue.
VNS, DSTC and 4C, BLIS, LDW ventilated leather ACC; Yummy.
All gone now - XC70 MY 13 SE LUX Flamenco red - goes better than the '09 even with its "Polestar plus" upgrade. I justy miss the PCC...
Hers: V60 Flamenco Red 215HP D5 (like above XC70 spec)
Bookmarks