What would cause enough PCV to blow the tube off of the head and blow oil all over the top of the head. I made sure it was on there good and tight but after 20 miles I checked it and sure enough it blew off again. New PCV kit installed during a full head gasket and new head replacement. Any help is appreciated.
| home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Results 1 to 4 of 4
Thread: Too positive. Way too positive
-
09-22-2011, 12:08 AM #1
Junior Member
- Join Date
- Sep 2011
- Posts
- 2
Too positive. Way too positive
-
09-22-2011, 04:36 AM #2
Senior Member
- Join Date
- Apr 2003
- Location
- Devon PA
- Posts
- 11,409
Obviously an incorrect or incomplele installation
-
09-22-2011, 06:21 AM #3
Senior Member
- Join Date
- May 2010
- Location
- New York & New Jersey
- Posts
- 371
Clogged oil separator box or incorrectly installed piping to/from the box to the flame trap.
-
09-22-2011, 10:38 AM #4
Senior Member
- Join Date
- Apr 2003
- Location
- Devon PA
- Posts
- 11,409
Possible blocked PCV oil line going into the pan
If that opening wasn't thoroughly cleared and cleaned out, all the new parts in the world won't do you any good.
Reply With Quote
Bookmarks