2001 xc70 205,000 miles, its share of issues still safe reliable car,

battery is two yrs old, tests fine, same as charging system...is there an etm relay on this car ? My s70 had relay issues from time to time........this car had a update about 3 years ago to the...

looking for some direction,

my 2001 xc70 has an electrical issue. starts up good but sometimes the cruise button wont lite up or the sun roof wont work, at the same time my etm acts up,...

vacuum hose cracked or fallen off .....who did the fit for the new etm sensor

looking to see if anyone has a good etm that I could buy, mine appears to be having issues...stalling,low idle, car is tuned,pcv clean, warned that the etm may need repair.....ok when cold but awful...

have you looked under the cover to see if t belt is intact and moving ?

also doing the lower bjoint tomorrw,posiible to remove the and replace w\o taking the control arm off the frame ? Looks like the two att bolts come off and it might come out... question to the...

had a few minutes to look at a few more items on the xc, found the plugs to be ngk, fairly worn and dirty, going to replace,need advice on what to put in....I know lots of choices, could you help me...

hows the driveshaft condition ? Also looking for a d\s front half axle.... from CT

did get a closer look, looks like below the tbelt cover, (crank pulley seal ?) but hard to tell, inside cover looks fairly clean, engine oil is on control arm and splashed back near oil cooler,could...

unsure of last pcv service, only had the car for a month or so.......probably safe to say it should be serviced

have not removed the cover, looks like engine oil though......I will pull the cover this weekend and have a look

fwiw, you can purchase a diode, place before #2 o2 sensor and get the curve to be less steep between the two 02 sensors, may keep the ecu happy and not be so quick to throw the lite....just a thought

01 xc70 200k miles, seems to come from pass side, shows on control arm area, not enough to leave a puddle but most since I wiped area clean, turbo appears dry, no pressure in...

keep it......

do you have the part number for the orings needed when doing the pump\ converter via the return line ?

could be related to exh valve contrl solonid, is the oil level good ? Has it thrown this code before ?

driveshaft vibrates a lot so removed and found it worn out, shifts good so far, will change fluid slowly as soon as time permits, pcv appears pretty clear must say its very smooth as a fwd...

Firs timer on this board, long time Volvo nut, recent purchase of xc70 awd, 2001 of course it needs a driveshaft right off the bat !!! but all in all a decent car, want to say hello to all and thanks...

looks awesome there Gearhead, thanks for sharing