Hello Hoonk and Thank you for your reply!
Do i align both camshafts in the back (driver side) just for the locking tool to fit and then install both VVT hubs?
Good point on the tappets! I had...
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: Charle
Hello Hoonk and Thank you for your reply!
Do i align both camshafts in the back (driver side) just for the locking tool to fit and then install both VVT hubs?
Good point on the tappets! I had...
Hello everyone,
I have a 2006 xc70 with a 2.5t. I bought a used head with both intake and exhaust CVVT hubs (seperate and not installed on camshafts) I was wondering how i can set the timing on...
Astro,
I really value your opinion very much and enjoy reading your posts and replies given the wealth of knowledge you have and sharing it with the forum over the years!
I am kind of picky myself...
Astro,
Thank you for all the info and explanation you provided, as always much appreciate it!
I will go ahead and switch to Valvoline Import.
Thanks again!
I have been using the Valvoline Max life (red bottles) in my cars. Should i switch to Valvoline import ( blue bottles) ?
Any idea what's the difference between the two? I did a search to compare but...
This video might help:
https://www.youtube.com/watch?v=PRIUBEqEgAA
I would check the wiring harness for the coils as well especially if the harness is solid dry.
Thank you for your reply vtl!
I did lube the seal using silicone with teflon lubricant. The seal is seated properly and the plunger did not have any black residue from the seal, just normal...
Hello everyone,
I have a 2005 V70 AWD with DSTC, 210,000 miles and a failing brake booster. The rubber seal around the booster plunger looks fine but i can feel the leak with my hand coming from...
No worries Hoonk i really appreciate your help as always!
Hi Hoonk and thank you for your reply!
This is from a website i found:
XC90 T6 cars use a Chain Gear to transfer torque from the transmission to the angle gear. Oil leakage from the chain gear...
Hello everyone,
I have transmission fluid mixed with chain drive oil and would like to reseal the chain drive. I have searched online for the removal of both (chain drive and angle gear) but...
Hello everyone,
I am wondering if i can replace the thermostat housing in my 2004 xc90 T6 with one from a 2004 S80 which does not have the plastic nipple mounted on the housing. To my...
I have used Toyota T-IV fluid with no problems.
There is a recall on fuel pumps if the white top plastic is cracked. Sorry i don't remember the recall number, you can google it.
I know couple of friends who got their fuel pumps replaced by the...
I bought a car which had the same exact damage and i just replaced the door and fender with same color from a junk yard.
Your car looks fine to me, just replace the door and fender and you should be...
This might help
http://www.volvoxc.com/forums/showthread.php?20498-Fuel-Pump-Recall-and-a-bad-feelling
Even though the state of Colorado where we live is not included in the recall in post #5,...
Three weeks ago a friend took his 2001 S60 to the dealer and got the fuel pump assembly replaced for free for the same exact problem you are describing!
He said there was a recall for the fuel pump...
I think there is a recall for cracks of plastic top of fuel pump.The Dealer will change the fuel pump free of charge.
Good luck !
I was charged $150 for the same exact welding job and that was the cheapest i could find around here in Denver.Some places quoted me $200 and one gentleman wanted $350 !!!!!
Spray some white vinegar mixed with water on the carpet ,if the smell of vinegar doesn't bother you! I removed all carpet once,washed it with soap and water and let it dry under the sun, smell still...
[QUOTE=howardc64;185902]What wrong with the propeller shaft? Most common failure is the front CV joint. Boot+grease gets destroyed by the super hot catalytic converter over time. Center bearing and...
Thank you so much Gentleman for your kind replies,that is a huge relief for me! This is my daughter's car and i need to get it fixed before the snow hits.
Thanks again!!
Thank you sir for your reply! May i know why?
Hello everyone!
I have a 2003 XC70 AWD with a bent drive shaft aka propeller shaft beyond repair. I searched online and it looks like only 2003 and up would work since they started with the Haldex...