134,000 kilometers with transferable factory warranty to 160,000 km
Dealer serviced, synthetic oil, records available

Premium Package + rear seat roll-up sun shades, rear seat fridge, summer...

This thread is a little old but what the heck...

I haven't had this problem before this most recent winter. Dealer says that if I want it fixed it will cost $200 for the kit + Labour =~$300 and...

I see that we are on the same track. Based on the rear suspension ID code I have "19" in this location and according to my VADIS copy (circa 2004, I think) it gives the product code for the rear...

Willy - thanks.

It is also my understanding that switching to/from nivomat involves more than just swapping out the shocks. I am concerned that the technician and the service advisor at my local...

thanks for the input.

I'll try calling Volvo Canada to see what can be done. Apparently, the rear shocks were last replaced 2-years / 40,000km ago, on warranty. I am not sure but is this a...

I went looking for this a little while ago but haven't ordered the part yet. Here is what I got from a dealer in Mississauga, Ontario for my 2003XC70 after a little convincing as they did not beleive...

Hi All,

Well I spent a bunch of time cruising the past postings and haven't been able to come to a conclusion.

My 2003 XC70 has a noticeable "clunking" when travelling at lower speeds over...

great looking job.

I know this post is pretty old but...

Do the controls on your steering wheel still work? (volume, next track, etc)

thanks!

Actually, there is no point of impact and all 4 lenses are showing same problem. Small hairline cracks that radiate from the point of injection in the molded part.

cheers,

peter.

I just had my 2003 XC70 towed back to the shop and spent $200 on:

30785453 ETM/ECM P UPGRADE

Noticed that my trouble had similar failure characteristics but the service bulletin discussed here...

if you still have them I might be interested...

Has anyone had this happen?

I was walking past my XC70 last week and with the way the light hit the tail lights I noticed what looked like a crack in the rear lense. I went to look closer and sure...

I have a 2003 XC70.

Was hoping that it was that easy but something seems to be missing somewhere...

thanks for the diagram - not sure if it answers my question but the good news is that based on that I checked the trailer plug and everything seems to work right.

In Canada, the 12V receptacle in...

thanks for the photos!

There is a slight colour difference between the cladding and the mud flaps but I guess I can try it and see... Also hard to tell since at this time of year in this part of...

Hi All,

Found some great information but not all that I am looking for...

Just got the 12V Cargo Power Outlet kit from a dealer (well almost). They delivered a part that claimed was the same...

looks like I should have checked here before running to the dealer - just picked up a set of mudflaps and noted the colour difference - Cladding on my car is dark blue - flaps look black - are the...

Which colour did you get?

How hard were they to install and where did you put the power conditioning boxes?

How are they working so far?

Looking forward to hearing!

cheers,

thanks - too bad since the volvo ones are less expensive...

can anyone advise as to part number - the 2003 parts listing doesn't have the flip key available so I need a 2004 part that should fit.

thanks.

lots of great info - thanks.

sounds like getting the square (thule) racks is my answer - now the question arises... I sometimes would need to use longer bars than what is standard with the volvo...

anyone know which chassis number is the tipping point?

thanks.

Hi All,

As many know in 2004 a new "flip key" was introduced that replaced the key and electronic fob combination.

Question is: Can you have the > 2004 flip key programmed for a 2003 model...

thanks.

after re-reading my post I realize I wasn't clear. When the car is on the hoist you can feel a little play in the driver's side front wheel. I can't feel anything obvious when driving.
...

thanks for the info - I am in Ottawa, Ontario - last few winters haven't been cold enough to get to the point where the salt gets too cold to work on corroding metal so conditions are ripe for...