Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2006
    Location
    Norway
    Posts
    28

    Default Side mirror problem

    I parked my car in town and pushed the button for the mirrors, both mirrors went to "in" position. When i came back to the car after about 15 minutes, started it up and pushed the button to fold the mirrors out. The left mirror went out but not the one on the right side. Then i thought "well i just have to push the button again" and then it went out but the left mirror went in again So now when i use the button one goes out and the other one goes in. I have tried to push it out manualy but next time i use the button its all the same again. Whats happening? Is this a known issue?
    NO(R)WAY

  2. #2
    Join Date
    Nov 2004
    Location
    Double Oak, TX
    Posts
    421

    Default

    Loose connection, you will have to open up the door panel and disconnect one and press the button to get them to match, or have the dealer do it. Might want to reseat the connection on both.

    Was it raining or something that might cause the connection to get damp or something?
    2000 F350, 4x4, Crewcab, 7.3L Turbo Powerstroke Diesel
    2005 XC90 2.5T OSD 06/2005

  3. #3
    Join Date
    Oct 2006
    Location
    Norway
    Posts
    28

    Default

    There was no rain, about 10 deegrees celsius and sunny. I will try later to day to "unplug and push". Thanks for the tip
    NO(R)WAY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •