The "high mount" brake light in the rear hatch has stopped working. The license plate lights are also not working. I took off the plastic surround on the door to gain access to the brake light and replace the bulb and test the wiring and of course it worked with the door up. When I closed the door they stopped working . I then raised and lowered the door slowly with the lights on and the licence lights flickered on and off. I suspect the wiring that is attached to the hinge and goes to a connector block located above the rear speaker on the driver’s side. Has anyone experienced the same problem and have any recommendations. I have not yet removed the lower cover (carpeted) on the door and can't figure out the sequence to remove it. HELP..........Thanks
Bookmarks