Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2022
    Location
    PNW
    Posts
    2

    Question XC70 Spark Plug Torque? 2008-2010 (B6324S)

    I was curious how many pound feet of torque Iím supposed to use according to Volvoís spec when installing plugs in my 2008 XC70? I canít find the information anywhere. Thanks in advance. 👍

    Also is there a specific torque for the Ignition coils as well or can I just hand tighten them?

  2. #2
    Join Date
    Aug 2017
    Location
    Pleasanton CA USA
    Posts
    486

    Default

    I don't have a torque spec. But, the spark plug has a crush washer. When it begins to crush you will feel the change in resistance to turning. Continue until you feel a much greater resistance to turning (the washer is crushed). That is the stopping point. Do not continue tightening beyond this point, or you risk stripping the threads in the aluminum head (the spark plug threads are steel !!).

    The coil pack retaining bolt -- hand tighten till snug. Overtightening will crack the plastic mounting ear.

    Carefully inspect coil pack harness for breaks in the wire jacketing. Use a non-acidic glue (methacrylate superglue or vinyl glue) to seal any breaks.
    2013 XC70 T6 Flamenco Red (hers)
    2015 XC70 T6 Seashell Metallic (his)
    past: 13 Volvos going back to '74 242 sedan

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •