Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2018

    Default Removing Rear Left Upper Control Arm of 2007 XC70

    I need to replace my XC70 rear left upper control arm.
    Vida only indicates how to install a rear left upper control arm. That includes adding 2 new bushings in the sub frame.
    Anyone could give a clue as how to remove the old one????????
    Attached Thumbnails Attached Thumbnails 30714701.jpg  

  2. #2
    Join Date
    Apr 2017
    San Diego


    You should be able to just work the installation instructions backwards. This looked like a tough job to me with the hard part being pressing the bushings in and out. I'm not sure a generic tool would work here because the positioning of the press tool is so specific to this job, and you have to press the bushings with the control arm in the bushing. But, I don't have real experience with doing it.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts