Socket size help

[8pack]

I need to change the relucter rings, rotors and pads.

Unfortunately I moved all my tools to another house we own and I don't have my metric tools where I am renting.

Can anyone tell me the socket/wrench sizes I need to remove the caliper brackets/caliper and the hub along with the size of the little Allen or star bolt that holds the rotor on? Do I need an extension or deep sockets,?

Basically, what size sockets do I need to do the job? I am going to go buy some individual ones. I have box wrenches.

Thanks!!

[pbierre]

You need a 7mm hex (allen wrench) bit to remove the caliper slide pins.

If you bought Volvo rotors, they come with the 2 replacement bolts for the caliper frame...just measure the bolt heads.

As far as the tiny bolt attaching the rotor to the hub, an adjustable spanner will do.

I've never replaced a reluctor ring.

[8pack]

OK. Thanks! Here is what you need:

19MM - Lug nuts
15MM - Caliper Brackets
7MM - allen caliper bolts
10MM - rotor retention bolt of you have a bolt instead of an Allen head
10MM - Dust Shield
8MM - Speed Sensor
18MM - Hub Bolts
13MM - Axle bolt
Swivel head - Very helpful with hub bolts if you have one
BFH - Solid and dead blow

6 sided sockets for all are ideal in the event that anything is seized on there.