I recently put on the 2'' lift from bad swede onto my 2004 xc70. I got it installed at American Tire Depot along with the Discovers AT 225/70R16s and the front springs knock up against the spring well. I did not install new struts or a new spring seat but I contacted bad swede to see if they had had the issue and they said new struts and spring seat might help but upon further inspection i noticed the strut mount from the engine bay looks off center. Im not too trusting of the work the installers did. Would new struts or spring seat fix this knocking? Or did the installers mess up somewhere? Pictures of the strut mount from the engine bay, the spring is knocking to the side where it looks the top of the strut leans.Click image for larger version. 

Name:	IMG_5291.jpg 
Views:	31 
Size:	95.3 KB 
ID:	8876Click image for larger version. 

Name:	IMG_5290.jpg 
Views:	28 
Size:	95.8 KB 
ID:	8877Click image for larger version. 

Name:	IMG_5289.jpg 
Views:	25 
Size:	91.1 KB 
ID:	8878Click image for larger version. 

Name:	IMG_5299.jpg 
Views:	28 
Size:	92.8 KB 
ID:	8875