I recently had the bad swede 2'' lift kit installed at American Tire Depot, as they were also putting on some new Discoverer AT 225/70616. After the install the front springs knock up against the spring well when you hit a bump and i also noticed the strut mount from the engine bay view looks off center. I did not upgrade my struts or spring seat when i got the springs installed. Will new struts and spring seat fix this issue? I contacted bad swede and they haven't really had this issue before, did the installers miss something? Or did i really miss by not getting new struts at the time? i know i missed by going to american tire depot, Pictures of my strut mount from engine bay and spring under the drivers side. Click image for larger version. 

Name:	IMG_5299.jpg 
Views:	1 
Size:	92.8 KB 
ID:	8872Click image for larger version. 

Name:	IMG_5291.jpg 
Views:	0 
Size:	95.3 KB 
ID:	8871Click image for larger version. 

Name:	IMG_5290.jpg 
Views:	0 
Size:	95.8 KB 
ID:	8870Click image for larger version. 

Name:	IMG_5289.jpg 
Views:	0 
Size:	91.1 KB 
ID:	8869