Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1

    Default Inlet Camshaft Sensor - Faulty

    For probably about eighteen months, my "Check Engine" light has come on intermittently and with no perceptible relationship to performance.
    When I plug in VIDA, I get an ECM Inlet Camshaft Sensor - Faulty message.
    I have many times cleared the code and continued driving without the annoying light yelling at me from the dash panel.

    But it just keeps coming back. For a while, it seemed like it would take about a week. Maybe 10 days of daily driving.

    But I cleared it on Thursday afternoon, then on Sunday, I really opened up the engine to accelerate onto the highway, nearly red-lining the tachometer.
    Not long after that demand on the engine, the "Check Engine" clicked back on ahead of my experienced 'normal' schedule. Still no performance issues that I can detect, but I feel less good about continuing to ignore the problem.

    A local mechanic had replaced this sensor back a year or so ago, saying something along the lines of "replacing the sensor usually fixes this problem" It certainly earned the mechanic shop about $200 without fixing the problem

    It obviously has not fixed the problem, but I'm not entirely sure what the corrective action ought to be. I put it to you experienced forum experts to take a stab at what you think may be the issue.

    Happy to provide further important info that I have unintentionally omitted.

    Cheers

  2. #2
    Join Date
    Dec 2009
    Location
    GA
    Posts
    1,419

    Default

    Quote Originally Posted by DannyStringhamMarquis View Post
    ECM Inlet Camshaft Sensor - Faulty message.

    I'm not entirely sure what the corrective action ought to be.
    What exact code are you getting? (I don't see one that matches "Inlet Camshaft Sensor - Faulty message", for a 2005 in VIDA 2014d).


    Either way cam sensor or position codes can be caused by the cam timing being very slightly off, a bad VVT unit, problems with the cam reset valve, oil pressure problems ....

    If you have VIDA - use the diagnostic info and testing procedures built into the program to diagnose the issue. Simply double click the code to bring up diagnostic info or choose the code from the "general diagnostic codes" menu under "fault tracing".

  3. #3

    Default

    I did not have an opportunity to do more intensive VIDA diagnostic this morning. Thanks for the quick reply Hoonk.
    And for the instructive tips on VIDA usage. I have many times followed that double-click technique, but have often been dissatisfied with the screen that loads after. It doesn't necessarily provide me definitive answers.

    But, I'll try again and get back with you. Thanks again

  4. #4
    Join Date
    Jun 2013
    Location
    Northeast
    Posts
    584

    Default

    I was "lucky" with my Camshaft position sensor error code. Fault tracing said to check the wiring and sure enough, the connector to the sensor was not clicked in all the way. So far, the code hasn't returned.
    2007 XC70, 206,000 miles
    2002 V70XC, 130,000 miles, parts car

  5. #5

    Default A step further

    So I've attached the result of double-clicking the fault code.

    Unfortunately, I'm not with the car right now, so I can't run more interactive diagnostics, but this is what I have typically seen.

    I'm using Mobil 1 0W-40 per the recommendations of many on this forum. I suppose I should get a reading on the dipstick of oil level.

    Anyone have any recommendations on the reset valve?

    Click image for larger version. 

Name:	Inlet Camshaft Sensor ECM-611B.jpg 
Views:	18 
Size:	50.3 KB 
ID:	8822

  6. #6
    Join Date
    Feb 2010
    Location
    Virginia Beach
    Posts
    4,111

    Default

    Not uncommon to have the solenoid oil screen get clogged with debris, and the resultant low flow at the solenoid cause timing issues.

    As part of the troubleshooting, after checking the electrical connection, I would remove the solenoid and clean that screen...
    Current Fleet:
    2016 Tundra Crewmax 4WD 1794
    2005 MB S600 (126K, Michelin AS4, HPL 0W40)
    2005 MB SL600 (55K Michelin AS4, Mobil 1 0W40)
    2004 V70R (143K, six speed M66, HPL 5W40)
    2004 XC90 (235K, HPL 0W30 Euro)
    2002 V70-XC (295K, HPL 0W30 Euro)
    2002 V70-T5 (225K, IPD bars, Bilsteins)
    2001 V70-T5 (125K, IPD downpipe, cat back and other mods)
    1932 Packard Sedan (straight 8, dual sidemounts, original paint and interior, Shell Rotella 15W40)

  7. #7
    Join Date
    Aug 2007
    Location
    NJ
    Posts
    639

    Default

    I have had P0016 intermittently for 2 years now and canít get it figured out. I use 0w-40. I have replaced the screens and solenoids to no avail. I am interested to see what you come up with. It seems like cool and cold weather is when it happens most frequently.
    2020 Subaru Outback XT - Pearl White Loaded-huge improvement over 2013!
    1955 Ford F-250 - 223 IL6, 4 Speed with Granny Gear, 109 HP, 4.88 Rear
    2017 Maserati Ghibli - Blu Emozione - GONE!
    2013 2013 Subaru Outback - charcoal Grey, Eyesight Collision Avoidance 110k miles
    2007 2007 XC70, Barents Blue, Charcoal Leather 215k miles
    1978 Bitchin' Chevrolet Z28 Camaro - Fuel Injected 383ci SB Dyno'd at 452HP 462FT/LBs Torque
    My build thread: http://www.nastyz28.com/forum/showthread.php?t=276139

  8. #8

    Default

    Quote Originally Posted by Astro14 View Post
    As part of the troubleshooting, after checking the electrical connection, I would remove the solenoid and clean that screen...
    Sounds like a good idea. I simply don't know what solenoid you are talking about. If you could help me with a little more direction I'd certainly appreciate it.

  9. #9
    Join Date
    Feb 2010
    Location
    Virginia Beach
    Posts
    4,111

    Default

    The intake cam solenoid.

    Thatís the code youíre getting, so...
    Current Fleet:
    2016 Tundra Crewmax 4WD 1794
    2005 MB S600 (126K, Michelin AS4, HPL 0W40)
    2005 MB SL600 (55K Michelin AS4, Mobil 1 0W40)
    2004 V70R (143K, six speed M66, HPL 5W40)
    2004 XC90 (235K, HPL 0W30 Euro)
    2002 V70-XC (295K, HPL 0W30 Euro)
    2002 V70-T5 (225K, IPD bars, Bilsteins)
    2001 V70-T5 (125K, IPD downpipe, cat back and other mods)
    1932 Packard Sedan (straight 8, dual sidemounts, original paint and interior, Shell Rotella 15W40)

  10. #10

    Default

    Suffice it to say, I'm feeling sort of embarrassed about this whole thread at this point.
    I'll update later when I have a little more time to compose the post, but, I think it boils down to me being dumb and not checking the obvious first -- oil level.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •