Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2018
    Location
    PA
    Posts
    2

    Default 1999 Transfer Case Elimination - Still a few questions...

    I'm looking at a 1999 S70 AWD in excellent shape EXCEPT that the transfer case is bad (at this point noisy). I've read a number of threads about converting these cars to FWD, and they seem to either be not clear or contradict each other. Please help.

    1. I know the right axle goes through the transfer case. Can pull the axle, remove the case and reinstall the axle.
    2. OR do you just remove the drive shaft? Seems as if you'd have loose ends flopping around fore and aft.
    3. One poster said there would be torque steer problems. True?
    4. If you do remove the transfer case, is there some interface or gap that must be sealed with a plate of some sort?

    I would really appreciate answers to this question. I know I need to do more research, but I need to give an answer on this car.

  2. #2
    Join Date
    Oct 2007
    Location
    Fairbanks, Alaska
    Posts
    233

    Default

    Pull the drive shaft. Nothing will flop around.
    A large percentage of P80 AWD owners have
    done this, usually due to mismatched tires.
    If the noise goes away, get on with your life.

    If not, the bevel gear (transfer case)
    can be removed without too much trouble.

    It will have just as much torque steer as any
    other FWD of the era under heavy acceleration.

    '98 " Last of the Good Ones!" V70 R
    Upsolute ECU - E-Codes/SilverStars - ArcticGrade Oil Lines - HD SkidPlate - Spoiler - XC Grill -

  3. #3
    Join Date
    Jul 2018
    Location
    PA
    Posts
    2

    Default Thanks very much!

    BEJinFBK : Thanks very much for your response!

  4. #4
    Join Date
    Dec 2009
    Location
    GA
    Posts
    1,251

    Default

    Quote Originally Posted by Eddystone View Post
    If you do remove the transfer case, is there some interface or gap that must be sealed with a plate of some sort?.
    as discussed in many threads, if you remove the transfer case you must make sure the sleeve does not fall out, methods include glue, a custom bracket or a hose clamp around the axle. I use a glue like jb weld to glue the sleeve into the transmission.

  5. #5
    Join Date
    Aug 2007
    Location
    NJ
    Posts
    613

    Default

    Search on my name, something like bevel gear removal or bypass. I have pictures an all from a 2001. LOOKS LIKE THIS IS AN OLDER POST....Answer below for future reference....

    http://www.volvoxc.com/forums/showth...ght=bevel+gear
    2017 Maserati Ghibli - Blu Emozione, Black Leather 17k miles
    2013 Subaru Outback - charcoal Grey, Eyesight Collision Avoidance 110k miles
    2007 XC70, Barents Blue, Charcoal Leather 200k miles
    2001 Honda Accord V6 SE - 82k miles - Steady reliable transport
    1978 Bitchin' Chevrolet Z28 Camaro - Fuel Injected 383ci SB Dyno'd at 452HP 462FT/LBs Torque
    My build thread: http://www.nastyz28.com/forum/showthread.php?t=276139

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •