First off - new member, 1st time posting.

I joined because I came across this post:

In it @Forkster describes adding a cooling fan to his CEM but I am hoping he or someone else can go into more detail on this. We live in Portland and 3-4 times a year when it gets over 90/95 degrees the CEM acts up and either will not start or starts in limp mode. I can send it to Xemodex and have them add a heat sink and fan for $120 but I would rather spend $15 and try it myself.

I assume you use something like this to power the fan?

and the fan itself?

Some actual parts and a few more details would be very helpful. Thanks