PCV job done, now car won't idle

[9dawgs]

Well, it seems I fixed it finally. The air hose from intercooler to throttle body was slightly off the intercooler. Put it back on correctly, tightened it down, and voila, everything runs fine.

Great! It's nice when it's an easy fix.

[Forkster]

Well, it seems I fixed it finally. The air hose from intercooler to throttle body was slightly off the intercooler. Put it back on correctly, tightened it down, and voila, everything runs fine. Thanks for all of the tips/suggestions guys. Without this site I would be hard-pressed to do much of this maintenance.

Next, replacing front springs to see if that fixes my poor alignment/camber issues. Replacing all four end links while I am at it...

If you're having poor camber/alignment issues - i suspect the control arms bushings and/or the tie-rod joints are worn. Check those first. End links are just end links and wouldn't cause issues with alignment/camber.