Results 1 to 8 of 8
  1. #1
    Join Date
    Apr 2013
    Location
    costa mesa ca
    Posts
    3

    Default what's this part on my 2002 xcv70

    Whats the name of timing pully on the right.
    Attached Thumbnails Attached Thumbnails 20130404_181558.jpg   20130404_181628.jpg   20130404_181709.jpg  

  2. #2
    Join Date
    Apr 2003
    Location
    Devon PA
    Posts
    11,409

    Default

    An arrow would be nice
    You have an
    Idler pulley and a serpentine belt pulley/tensioner
    All emails please use: jrl1194 (at) aol.com

    2007 V70 2.5T White/Oak, 112K miles. My daily driver and GORGEOUS
    2000 V70R wife's. Won't sell, now at 148K miles !! and still (almost) perfect.
    2000 S70 GLT SE with 29,000 miles!!! A time capsule, V70R front bumper, Volans, etc. SOLD!!! (I Will regret selling this!)

  3. #3
    Join Date
    Apr 2013
    Location
    costa mesa ca
    Posts
    3

    Default

    Thats a picture of the timing belt not the serpentine belt. What is the name of the pulley on the right in the picture. Thats what my question was

  4. #4
    Join Date
    Mar 2005
    Location
    Pacific Northwest
    Posts
    1,927

    Default

    Difficult to understand your question since you posted 3 pictures. Not sure which pulley you are referring to. But in general, you have the following in picture #2

    Intake cam gear (on the intake manifold side of course)
    Exhaust cam gear (on the exhaust manifold side of course)
    Timing belt idler roller (The pulley just below the intake cam gear)
    Timing belt tensioner (To the left of the idler roller)

    Here is what they look like in online stores

    http://www.fcpeuro.com/products/volv...roller-9146376
    http://www.fcpeuro.com/products/volv...ioner-30637955

    If you are replacing timing belt, have to do the belt+idler roller+tensioner.
    Past Volvos : 01 V70 T5, 01/02 V70XC, 02 V70 NA, 00 V70XC
    Current EV/Hybrid : 13 Tesla S85, 11 Gen3 Prius
    Friends cars under my care 17 Audi A4 Quattro DSG (B9) 05 Audi A4 Manual 6sp Quattro (B7) 04 e320 V6 Auto, 05 Accord 2.4, 08 Element 2.4, 08 Camry Hybrid
    Past Others : 01/03 VW MK4 Turbo/NA/01M. Gen1 Prius, Gen1 CRV, Gen2 Rav4, 02 Town&Country, 06 Corolla, 12 Audi A4 Quattro (B8), 07 Civic 1.6
    https://sites.google.com/view/howardsvolvos

  5. #5
    Join Date
    Jul 2011
    Location
    Piedmont Triad, NC
    Posts
    154

    Default

    Try to just point your camera to the item in question, only one picture will suffise,sometimes it is not easy to use arrows( pointer) for a novice, but if you asked a question like" What's the name of pulley in the right picture" You would get the answer that it is a pulley.
    Howard gave good descriptions.
    1998 V70 187K miles and counting,now sold
    2002 VW GTI 1.8 T My sweet baby
    2002 V70 XC 158K miles sold
    2005 V70 XC 98Kk miles Newly aquired

  6. #6
    Join Date
    Apr 2013
    Location
    costa mesa ca
    Posts
    3

    Default

    Theirs a better picture. Sorry I'm using my phone. Trying to firgure out what it is cuz I'm loosing mass amounts of oil from their. You can see the oil stains
    Attached Thumbnails Attached Thumbnails 20130404_181709-1.jpg  

  7. #7
    Join Date
    Mar 2005
    Location
    Pacific Northwest
    Posts
    1,927

    Default

    Quote Originally Posted by sugarShane View Post
    Theirs a better picture. Sorry I'm using my phone. Trying to firgure out what it is cuz I'm loosing mass amounts of oil from their. You can see the oil stains
    Ok, looks like you are looking for an oil leak. This is probably a little tricky because of the moving belt + gears + related airflow that can blow the oil around and therefore harder to find the source.

    With this said, here are some guesses and next steps

    - We are looking at your intake cam gear. There is a seal that prevents the oil in the head from leaking out. Obviously the gear is connected to a shaft that enters the head to turn the cam lobes. And the seal needs to preventing lubricating oil in the head from leaking out while allowing the shaft to turn.

    - Leaks in the engine seals are commonly caused by clogged PCV system. You can read up a bit on how PCV works and why its necessary. When the PCV system is clogged, there is pressure inside the engine that wants to push the seals out and therefore leak. There are probably 6 seals of interest (2 for each cam, 2 for the crankshaft). You have an 02 and likely over 100k miles on the car. If PCV system have never been replaced, then this is a likely candidate for the source of your problem. If the seal is replaced but PCV remains clogged, some of the seals are likely to leak again due to the presence of internal pressure.

    So I would suggest

    1. Clean up the current oil really good so you can better see the source of the leak as fresh oil makes its way out. Again, spinning gears + air flow in this area may make it a bit harder to find as it spins + blows the leaked oil drops around.

    2. Check your PCV system for clogs. Here is a recent thread on how to check the PCV

    http://www.volvoxc.com/forums/showth...ather-box-tool
    Past Volvos : 01 V70 T5, 01/02 V70XC, 02 V70 NA, 00 V70XC
    Current EV/Hybrid : 13 Tesla S85, 11 Gen3 Prius
    Friends cars under my care 17 Audi A4 Quattro DSG (B9) 05 Audi A4 Manual 6sp Quattro (B7) 04 e320 V6 Auto, 05 Accord 2.4, 08 Element 2.4, 08 Camry Hybrid
    Past Others : 01/03 VW MK4 Turbo/NA/01M. Gen1 Prius, Gen1 CRV, Gen2 Rav4, 02 Town&Country, 06 Corolla, 12 Audi A4 Quattro (B8), 07 Civic 1.6
    https://sites.google.com/view/howardsvolvos

  8. #8
    Join Date
    Jan 2011
    Location
    Fort Worth Texas or thereabouts
    Posts
    400

    Default

    I see oil scattered all over. Clean it up with a can on brake cleaner spray. Run it until the oil starts appearing and you'll a better indication of where it leaks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •