So I went to the local Autozone, purchased a battery and hooked up the memory saver thru the OBD II connector. Swaped the battery jumped in fired it up and suprise......door locks, sunroof, maplights not working...ok ouick fix lock and unlock with master key and bang I'm in business. Now i drive away and flip on the turn signal...not working (hazards are working) so i pull over and start searching for other issues and find that none of the steering controls work. Radio works but is dim (cant see anything) Headlights work but switch does nothing and Fog lights are out. I have now disconnected the battery for thirty minutes and tried the neg and pos touched together for 30 sec. NOTHING Works HELP Please.
Thank you in advance for any response replies.
Cyrus
PS. Alarm service requried light is on but has been before this.
| home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Results 1 to 8 of 8
-
11-25-2011, 09:09 PM #1
Member
- Join Date
- Nov 2011
- Location
- Clearwater Beach, FL
- Posts
- 52
Help! Replaced Battery..now Steering,Headlight,Radio ETC Please Help!!
-
11-25-2011, 09:12 PM #2
Senior Member
- Join Date
- Feb 2010
- Location
- Virginia Beach
- Posts
- 4,118
You're not going to like the answer...you did it wrong...there are notes here...
Follow them, and with luck, you'll reboot the UEM and those things will start working again...Current Fleet:
2016 Tundra Crewmax 4WD 1794
2005 MB S600 (126K, Michelin AS4, HPL 0W40)
2005 MB SL600 (55K Michelin AS4, Mobil 1 0W40)
2004 V70R (143K, six speed M66, HPL 5W40)
2004 XC90 (235K, HPL 0W30 Euro)
2002 V70-XC (295K, HPL 0W30 Euro)
2002 V70-T5 (225K, IPD bars, Bilsteins)
2001 V70-T5 (125K, IPD downpipe, cat back and other mods)
1932 Packard Sedan (straight 8, dual sidemounts, original paint and interior, Shell Rotella 15W40)
-
11-25-2011, 09:17 PM #3
Member
- Join Date
- Nov 2011
- Location
- Clearwater Beach, FL
- Posts
- 52
Where are the notes to follow?
Originally Posted by Astro14
Thanks for the quick response.
Cyrus
-
11-25-2011, 09:30 PM #4
Member
- Join Date
- Nov 2011
- Location
- Clearwater Beach, FL
- Posts
- 52
Uem
Map Lights, Doors, and sunroof work. But the rest still not working. any advice to reboot Steering control Module?
-
11-26-2011, 01:23 AM #5
Senior Member
- Join Date
- Sep 2002
- Location
- Belgium
- Posts
- 2,404
The pdf contains the disconnect/connect procedure.
Willy144 GL (1974)--->244 GL (1982)--->940 GLE 2.3i (1992)--->XC70 2.5T (2004)--->XC90 T5 (2018)
-
11-26-2011, 09:43 AM #6
Member
- Join Date
- Nov 2011
- Location
- Clearwater Beach, FL
- Posts
- 52
Thanks Willy
Followed these instructions... still have same issues.
-
11-26-2011, 03:33 PM #7
Member
- Join Date
- Nov 2011
- Location
- Clearwater Beach, FL
- Posts
- 52
Smacked the fuse box and all is well again!
Must have been loose????? IDK!!
-
11-27-2011, 01:54 AM #8
Senior Member
- Join Date
- Sep 2002
- Location
- Belgium
- Posts
- 2,404
That must have been an intuitive action
Willy144 GL (1974)--->244 GL (1982)--->940 GLE 2.3i (1992)--->XC70 2.5T (2004)--->XC90 T5 (2018)
Reply With Quote
Bookmarks