Hi all,

This is my XC70 AWD 2006, with 290K Km.

Recently, I noticed that when I go from P to R, and of course the brake pedal is pushed, I get this sound.

Video

Any ideas what can...

Now I understand what's going on with that bracket.

There is a rivet that fixes it to the body of the car, the rivet is broken and therefore that is the reason why I could not give a sense to...

Anybody?

Thank you!
Alex

Hi all,

I have an XC70 AWD '05 without Four-C and I need to replace the sensor level (P/N 8622446).

The sensor was easy to remove, just one nut, however, I forgot to take a picture and now I...

I would not take any risks and try to find the same.

As far as I am concerned, I will first try to clean it and see what happens.
The second option is XeModex because, as you noticed, the pumps...

Thank you for confirming this to me.

I hope to find a good one, not easy because the scrapyard will not know if it is working either.

Alex

Hi!

I wonder if you can help me with my question.

Last year my XC70 2005 starte to display the ABS/Anti-Skid service required message.
I had BCM-0070 and BCM-0072 errors, so I sent the BCM...

Hi,

I have no problems to solder but I do not have a leaded solder, at least, not with such a small tip.

I have difficulties in finding that capacitor in small lots (bag of 10), even Digikey...

Thank you Bill.

Actually I just put a drop of glue on the capacitor's crack and re-assembled the whole thing.
So far, it works like a charm.
However, I will take a look around for a new...

Thank you very much for confirming this.
I guess the main problem is now to find another one with the same value.

Alex

Would this be a ceramic capacitor with 562 Picofarad??

Hi guys,

Today I had to remove the rear wiper motor of my XC70 (2005) as an attempt to clean and fix it, however I ended up to break a tiny thing which joints the two copper blades that are...

Hi all,

I gave up, at least for the time being.

There is no way I can pull this out, the shaft is not loose, it is blocked by the rust, the M8 20mm bolts on the back of the shaft did not help...

Hi,

Nobody knows?
As a matter of fact, the original gasket was all metal, this one is genuine Volvo but different.

Alex

Hi all,

I am putting on the new exhaust/muffler, the gasket that goes from the catalytic converter to the exhaust (P/N 9179056) comes with one side metal colored and the other side is black, do...

By chance, do I have to unbolt the front cv joint to remove the rear one??

Alex

OK guys, I must be doing something wrong here, the darn thing does not come off, something is holding it but cannot see what.

Maybe from the pictures you can see something I do not see, :confused:...

On the back of the flange there are two/three extra holes where you can screw M8 20mm bolts in order to push the shaft out, usually one does the trick, but not in my case.

The centre bearing is...

Hi,

The filter can be removed that way, but not the oil pump, there are only 2mm (1/16) between the pump and the flange, therefore it cannot be removed and if you do not remove the oil pump you...

Yes, as far as I see, this is the only way.

Hi all,

OK, car is on the stands now, rotating one of the front wheels rotates the shaft, which is good.

What is not good is that I tried already 2 bolts on the back of the flange, no movement....

Hi all,

My car is an XC AWD 2006.
I am new to this kind of project on my car, so bear with me.

I have been trying to remove the rear propeller shaft since this morning, but so far I was only...

Hi all,

I'd like to know if any of you has ordered recently stuff from https://www.palisadesvolvomazdafactoryparts.com
I placed an order on April 18th, after various attempts to contact them via...

Unfortunately there are hundreds of FriendlyName instances in W7 Pro and therefore it is impossible to check them all, it seems I cannot perform a search on the hardware registry part only....

Colin,

I have already VIDA 2010D installed on VirtualBox and have no issues, I just want to change PC and have a dedicated one for VIDA and since I will only have this program installed on the PC,...