Ok.my leak fix had worked. It was the headlight washer pump! Totally rusted out and blew out the housing so it was leaking right through the motor. I removed to pump, cut off the nipple and fillet it...
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: 8pack
Ok.my leak fix had worked. It was the headlight washer pump! Totally rusted out and blew out the housing so it was leaking right through the motor. I removed to pump, cut off the nipple and fillet it...
My reservoir is leaking like a sieve. It seems to have cracked and broken. I tried patching it and the plastic just doesn’t take well to any adhesives.
How big a PITA is it to replace? It is...
The good news is it was just a relay! Relays are electromechanical parts and they simply just fail sometimes. No particular reason other than age maybe heat if you live in a hot climate. Just happens.
I can’t speak to exactly the cause, but depending how many miles on your car you may want to consider cleaning the throttle body and the MAF sensor if you are handy. If you are not handy then find a...
Thanks! Found it and changed it today. A real PITA. You can barely see the fuses or reach them without being a contortionist or turning upside down on the seats with your head under the dash after...
Thanks, will look tomorrow. I had no recollection that there were fuses under the dash. Only in the access panel on the side of the dash and under the hood.
Thank you very much. I appreciate the response. What is the CEM? Under hood or the dashboard on the left?
2007 XC70.
Long time since I have been on here!
I cannot for the life of me find the fuse for the cigarette lighter. Can someone point me to it?! Can't chag my phone....the world might end :p
First, great feedback everyone.
I am intimidated by the timing belt change. I did it on my Saab 9-5 V6 and it went well and I did the PCV update on this car without too much trouble, although it...
My 2007 has 212k on it. Timing belt was due at 210k. The car is in pretty good shape. Decent paint, nice interior and all appropriate maintenance done but still isn't worth much. I think its worth...
I have the shop manual for the Maserati. It is still under warranty and I pre-purchased the maintenance so I don't touch it. It is leased so it goes back in June. Great grand touring car, like it way...
Thanks all. Looks like trade in us $1500 at best.
I will look at the timing belt and see how it looks. If it has obvious wear maybe I will try doing it myself. If no obvious wear I am going to...
Hi,
2007 with 212k miles. Trying to decide what to do with it. I use it as a mostly daily driver, Rain, snow days when I don't want to drive my nicer car etc. I use it for weekend round trips of...
This is an Off Topic post but I am trying to find someone who can help me create a part for a project car I have. I have mocked up a gauge cluster and wanted to see if someone could print it for me....
Thanks. I tried that too! I can't figure out wear the switch for the hood is so I can check it. I suspect the hood switch may be bad because if it was the doors or hatch I would have a door ajar...
You should be able to lay on you back and stick your head under the car by the doors and hear it. Or jack it up and put it on JACKSTANDS, not the jack, and roll under there and listen. If you put...
All my doors close and I have the exact same problem! I have checked all my latches etc. but the lock flash doesn't work anymore, but the doors do lock.
Any insights welcome!!
Check your resonator - "middle" muffler..........they go bad and start to rumble....just replace with a straight pipe....
Thanks all! I am pretty sure it is all back together properly and the pictures I posted are the way it seats. I did replace those hub seals. No more ABS lights and cruise works nice and consistently...
Unfortunately the other side is apart as well. I will look when it goes back together. I just don't remember being able to see the reluctor ring from the back side of the hub so clearly. I remember...
I am just finishing the installation of my reluctor rings. I am reinstalling the hub and can't remember how far it seats in the hub. I installed the old axle bolt to pull the axle tight into the hub...
Here are a couple of threads that may help solve your ABS light issues. The key is taking a look at your reluctor rings through the speed sensor hole. I am not sure if it is noted in the other...
OK. Thanks! Here is what you need:
19MM - Lug nuts
15MM - Caliper Brackets
7MM - allen caliper bolts
10MM - rotor retention bolt of you have a bolt instead of an Allen head
10MM - Dust Shield...
I want to thank this board AGAIN. Every time I have an issue if i do enough searching or post the right question I ALWAYS get an answer to the question. I have never purchased a VIDA and I think...
Do a drain and fill on your transmission. 3.2 quarts of Mobile 3306 transmission fluid or Toyota T-IV. I use the Toyota fluid, way cheaper than Mobil or Volvo ($20quart!!! Vs. $10 vs. Mobil and $6-7...