The spark plug core was loose when removed, it was new and put in at same time as engine, so I don't know which gave out first, the spark plug or the coil, the coil had a melted spark track out the...
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: FrostyV70XC
The spark plug core was loose when removed, it was new and put in at same time as engine, so I don't know which gave out first, the spark plug or the coil, the coil had a melted spark track out the...
Bump
Do you guys want to see a blown out ignition coil, and I mean REALLY blown blown out ignition coil.
Sorry but I can't add a pictures on my phone or delete post.
Adding image later (really...
My old engine has burn holes in 2 cylinders and needs a replacement, just bought a lower milage (60.000+) S60 from England and while waiting I just started wondering, I can now put my mind at rest...
Hi all, can a catalytic converter from a '01 S60 with a B5244T3 engine fit a '01 V70XC B5244T3, or does the difference in models propose some fitting problems.
Best regards
Frosty
It's not the shocks or the springs you have to think about but the hitch setup itself, I installed the detatchable 50mm ball kit from volvo and was surpriced to find it's only rated for 90kg, that's...
Yes, if I remember corectly it was expensive at the time, but I was going to replace the rear shocks anyway, so it sort of leveled out a litle, pun intended. :)
Frosty
The Nivomats are optional in europe, I think, I just had the dealer order them and my indy installed them, one day in the shop, it's just plug and play, they really are worth it when towing with some...
Nivomatīs
Finally fixed, swapped ETM for a used one from the states, yellow sticker made in '09, had to wait 3+ weeks for the unit, stupid UPSP priority international mail, priority my a##, anyway, old one...
Just for the record, the mainfold ETM screw threads are not open ended, in other words they have a bottom.
Frosty
Ok
Hello Howard, and thank you for all your help.
What I mean is if the thread goes through into the manifold, I might be able to just run it through with a drill bit, if not, more difficult.
Milage...
Left and right front springs
Hi all, does anyone know if the ETM bolt threads go through into the manifold or if the thread bottoms out, broke one after many removals and installs, metal fatique, ETM not leaking air at the...
Thank you hoonk for the info.
I forgot to mention, I did swap the AP unit from another car and all is the same, the dealer did not have a new unit at the time so I swapped it from a 02 V70 with a...
(mobile)
Had a vida TPS sweep test done this morning, ewerything tested ok voltage ok but still geting ETM code, car is still runing lumpy and unresponsive at first start when colde but when it...
Thanks again vtl, Car is running fine as of noon yesterday with many restarts, no new codes except for the 0014, I will have to wait for it to go bonkers again.
Regards Frosty
Thank you vtl, are you talking about the 0014 or the 0121 code? The 0014 is probably the variable valve timing wheel vvt and has been on for some time now, the 0121 is the one giving me problems...
Bump up !
Hi all.
Key symptom/problem is when starting the motor that the throttle pedal has no response no matter how much I stamp on it and that has happened about five times so far in the last few...
Ok, Allan that clears it up, and thank you for sympathizing with me, it's been a hefty job and I'm not done yet.
Ok, thank you again Howard64, I will take this to bed with me tonight an memorize it, I have seen this info before but not dissected like this, nice job !
Regards Frosty
I am working hard to fix this, but the problem did not really surface until I rebuilt the turbine a week ago, crankcase pressure can remain unnoticed not to mention the fact that I did the PCV...
Thank you Howard64, I think that if our cars PCV system is not working as it should, and if we try to fix it with unorthodox methods we are opening a can of all kind of worms, and I tried the open...