Search:

Type: Posts; User: gdr

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    2,128

    Could be one was already missing? ...

    Could be one was already missing?

    8462846384648465
  2. Replies
    5
    Views
    2,128

    Looks like you found all the tabs/screws. Vida...

    Looks like you found all the tabs/screws.

    Vida shows 7 on top, 4 in each wheel well and 3 on bottom.

    Pull sides out then forward. The sides must lock on to something which must be the step you...
  3. Replies
    3
    Views
    23,253

    Whats even more screwed is that the new bearing...

    Whats even more screwed is that the new bearing comes with a new hub already pressed in. This requires specialized tooling to press it in.

    They really went backwards on the newer design.
  4. Its the right side mount. I just changed mine...

    Its the right side mount. I just changed mine recently at 103k miles.

    First signs were a slight grind/rumble sound when drive was engaged from the right side firewall/floor area. Sound got worse...
  5. Most auto parts stores will read the code for you...

    Most auto parts stores will read the code for you for free.
  6. Thread: Pet Barrier

    by gdr
    Replies
    2
    Views
    1,966

    https://www.myswedishparts.com/oem-parts/volvo-pro...

    https://www.myswedishparts.com/oem-parts/volvo-protecting-gra-31498781

    That's the one I have in my 2008. The >2007 barriers are different(have one of those too)

    They are pricey but there is no...
  7. Replies
    5
    Views
    2,793

    16 Level indicating pipe 1.00 30713218 17...

    16 Level indicating pipe 1.00 30713218
    17 Plug 1.00 30713219
    18 O-ring 1.00 1233068
    19 Gasket...
  8. Have you tried soaking the ball joint with some...

    Have you tried soaking the ball joint with some PB Blaster? Sounds like yours is just stuck.

    When I tried my struts I had the front end up on stands. Disconnected only the sway bar links and the...
  9. I had to edit my previous post. Whenever there...

    I had to edit my previous post. Whenever there should be a degree symbol I'm seeing "&#176" which was confusing me.

    As for the axle bolt your right as for vida not showing it. They do show it for...
  10. Replies
    3
    Views
    1,975

    I'm curious on how long you had it and how much...

    I'm curious on how long you had it and how much used before it started sagging?
  11. What did you use to pry the control down? A long...

    What did you use to pry the control down? A long bar as shown must be the key. The lower control arm removal is similar to my previous post. Remove ball joint bolt,remove cv bolt and pry the arm...
  12. The rears are simple as they are shocks so no...

    The rears are simple as they are shocks so no spring compressor required. Jack the back up and take the wheel off. The shock is right there and easy to replace. 2 small bolts hold the mount to body...
  13. Just made a attempt at the fronts today. The...

    Just made a attempt at the fronts today. The knuckle needs to come off. You can not drop the suspension down enough to side the strut up out of the knuckle.

    Vida show them removing axle bolt and...
  14. I'll be doing my 08 for the first time too in...

    I'll be doing my 08 for the first time too in about a week.

    The rear mounts bolt in from the wheel well.
  15. Replies
    1
    Views
    1,567

    Looking thru vida and it sucks. Remove the...

    Looking thru vida and it sucks.
    Remove the following

    Battery
    engine cover
    air box
    intake tube
    looks like 1 ps line(the pipe going over ac)
    serpentine belt
    a few mounts to ac compressor
  16. Looks is always going to be a personal preference...

    Looks is always going to be a personal preference but I like the Zephyrus. It will be a lot easier to clean than the pan wheels.
Results 1 to 16 of 16