Bilstein has B4 for the 2008 ->
If you really want something special you could try BCracing, they have sets for the V70 2008-> should also fit on the XC70.
I will put a new set of Sachs on, front...
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: bartk
Bilstein has B4 for the 2008 ->
If you really want something special you could try BCracing, they have sets for the V70 2008-> should also fit on the XC70.
I will put a new set of Sachs on, front...
I don't agree with this, the front suspension you can only change the toe, at the rear you only can change the camber. In the rear the bottom arm can be adjusted with the inner Eccentric bolt...
Front also done if I would make the spaccer bigger it will get very difficult to install,
almost can't push the suspension arm down any more, Good thing is that the arm is not hitting
the...
you could use that for the rear, the problem is that the front has a small travel adding these in the front would reduce the travel down linear, that is why I put the spaccer on top of the strut
finally some good weather. installed the back 3D printed spaccer.
IT looks good
8940
rear lift with one jack at 33 sec
https://youtu.be/uZNC06Z7imQ?t=34
The way that I want lift it it is possible to lift a Nivomat XC/V70, I only fill the spring, but it is not so difficult to also do the same for the shock,
The only thing is that you should make...
Hi all
I would like to share my experiences in lifting the my XC70 2012. Until now I like the looks of it.
Stage 1
I bought 235x60x17 ( 5% higher wall ) Cooper WeaterMaster WSC. Don't Advice...