You may also want to try adjusting the parking brake cable at the handle, maybe loosening it up will release the pads a little more, letting you get the rotors on. It can then be adjusted for proper...
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: jman474
You may also want to try adjusting the parking brake cable at the handle, maybe loosening it up will release the pads a little more, letting you get the rotors on. It can then be adjusted for proper...
I don't know if this is related, but I once got that message when I tried to start the car while the key wasn't fully "snapped out" from the key fob (i.e. when the key was in the ignition, the fob...
I'm going to assume you're using the VM Workstation Image made available through this thread:
...
My understanding was that when the XC model was originally introduced, it was called the V70 XC. Then, during the P2 Generation, for the 2003 MY it was renamed to XC70 (The difference can be seen in...
Alright then! Thank you so much for your help. I will update once I've done the work, in about a month or so.
Keep being awesome.
Thank you! This is perfect.
Do you happen to know if those rivets/clips are ones I would need to replace? Or can I put them back in like the door panel ones?
Here you go (Imgur Link).
I know that the rust extends further down than I can show, but it was too difficult to try and pry the trim back with one hand and take a picture with the other, showing...
Hello all,
So I recently bought myself an '04 XC70, and after a few months of driving, I noticed a bit of rust underneath the trim at the bottom of the drivers door, near to the sill plate insert....