That’s good to know, but my CFE doesn’t read it unfortunately.
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: NTXC
That’s good to know, but my CFE doesn’t read it unfortunately.
Trans doesn’t have a temp sensor, it’s calculated off the coolant temp.
Haldex shows up fine on my car.
I’ve got one sitting in the garage after an ultrasonic cleaning. You can have it if you pay for whatever the shipping will be. I’m in CT so logistics may be a thing but if you cover postage you can...
I assume you mean intake manifold in your post.
Personally, I see a ton of people here claiming these are fragile. Personally I’ve taken mine out 4 or 5 times, spray inside the body (not the outer...
Have you peeked at your exhaust to make sure it’s still connected? It’s getting up there in age so you should make sure nothing has rusted through before you start chasing parts.
Also, when was...
Seconded. I bought this kit and it made everything a breeze.
An in-line filter is something you have to add yourself (I did). Personally I wouldn’t drain, just push a certain amount out (2 quarts), fill 2 quarts. Repeat until your satisfied with the color....
Based on the recommendations from this forum I’ve been using Toyota IV fluid for my XC70 for nearly 50K miles now. It’s literally the same stuff rebranded, working great, and much cheaper. I picked...
9413
What a difference!
My bulbs arrived today. Very dumb question here. These have the Canbus attached directly to bulb, I’m assuming the resistor (arrives tomorrow) just goes directly between the canbus and the factory...
Are you aware of any good write ups on performing this upgrade? Thanks!
Great question. I put new ones in about a year ago but I’d love to go brighter if possible. I don’t want those blinding ones, but a little more oomph would be nice. I’ll be keeping an eye on the...
Honestly, it looks to me like you just knocked some gunk that was clogging up your windshield drains (hence the ice dam). The black stuff is just the pollen/leaves/dirt mixture congealed. I clean...
I wish I could be more helpful but it kind of sounds like a loose connector somewhere.
I chased multiple seemingly unrelated codes in an S40 only to find out that a major connector wasn’t seated...
This was technically over the last two weeks:
New Sachs quickstruts in the front
TRQ quickstruts (Sachs doesn’t do it) for the rear
IPD sways in the front and rear
IPD HD sway bar end links all...
Hello everyone, I’m having a hell of a time finding these. I’m down to only one of the original spring/bolt combo. The rest are just m8 1.25 pitch bolts. I’m getting a terrible shrieking noise when...
Any engine lights on? Can you do a scan?
I was under powered and shaking pretty good for about 5 minutes before my check engine light came on, turns out I was getting cylinder misfires due to a...
I believe that’s part of the fm antenna system
I installed my cooler hours before a trip to NH from CT, basically at any time I stopped I checked the fluid level and slowly added more bit by bit until I was comfortably within 1/8”-ish from the...
What makes you think it’s the throttle body? Any particular thing point you in that direction?
FYI I bought my car and lost power on the drive home. Turned out to be the fuel rail pressure sensor.
Without codes it’s tough to say, but you could have a bad coil. I had one go on the highway a few months back. Lost a ton of power, dash light came on, and a prominent vibration.
First things...
I installed a truck cooler on mine, did the same thing with a laser thermometer. Definitely a difference, never checked temps in VIDA.
To the original poster, I think physics itself dictates a...
Looks nice, I’ve just been using a tough leather patch on mine because I have black seats and I’ll be the last owner of my wagon.
Did you install VIDA or are you running it as a virtual machine through something like VirtualBox?
This is a basic suggestion, but I’m doing it because I had to chase a leak after replacing the whole cooling hose system: doublecheck and tighten a fit further any and all hose connections now that...