Hey Astro!
What pad do you use with the buffer?
Thanks!
QUOTE=Astro14;219784]The fine glass polish by Griot's. It's a cerium oxide abrasive (I think) and super fine. I've used it with a buffer...
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: men2be
Hey Astro!
What pad do you use with the buffer?
Thanks!
QUOTE=Astro14;219784]The fine glass polish by Griot's. It's a cerium oxide abrasive (I think) and super fine. I've used it with a buffer...
The parts did clear the codes and I now have the needed all wheel drive! No time yet for the trim.
Thanks again!
I bought these from JRL. A special thank you to Jim for going out of his way to help me with other parts I needed.
Thank you troyhyde! I like your way of thinking....noooo head gasket. And I do run at least 15 miles one way wherever I go. I live in the country.
For now I will just re sample oil in 4k miles. I do not think it could be oil cooler. Higher oil pressure than cooling system should push oil into coolant if it was bad.
The milky looking oil is...
145K miles. Never overheated that I know of. I have had it it since 120k issue just showed up on stick.
PCV system done complete@127K.
Why would the moisture be showing up on the stick? I had a...
6765
Does anyone have any idea where to start looking for the problem? No smoke from exhaust. Runs fine. Has a little brown milky substance on top of dipstick. Not in the oil on the stick. I did...
Hi troyhyde
Do you have any more info on the CBV repair?
Do you check the shaft for up and down play or in and our?
Thanks!
Below,
Did you have adaptation done after the installation?
A new harness is available for 11.63
Harness
Volvo Part: 9483494
Can anyone tell me if this size tire will fit a 2004 XC70.
I am having the dealer align my 04 Xc 70 in the morning. I wondered if anyone would share the preferred specs. I remember JRL suggested the rear toe close to 0. Are there any other ones I am not...
JRL, I think you nailed it! That is exactly when it happens. I will see if the dealer will do it next time in.
I have experienced the same thing.
Astro14, how did you clean out the particles from the cylinders when you were done?
QUOTE=Astro14;172562]Threads were pretty loaded up with carbon on the T5 when I first did the plugs at...
Thanks Howard and Bill!
Hello,
I am replacing the rear bearing housing bushings as well as the trailing arm bushings and the link at the end of it.
Can anyone supply me info on torque specs or any other info ??
Thanks!...
51.79 Bosch at Rockauto
Rockauto had the best price when I changed mine......
I have had two replaced in the past year due to stone damage resulting in long cracks. Used Glass Doctor. Non-OEM. No problem, ever rain sensor works fine. I guess the installer is everything with...
Did you try Rockauto? Might save you some money..they carry Sach's brand
Me too!
Jrl, if you were to do this, what brand would you use? I have read about using OEM
bars from an R model also. Appreciate your thoughts!
Howard, hello! Is this the best place to get a good valve body? I stopped at an excellent tranny shop that has been in the business for more than 50 years and he said he will not use a reman. Said...
Taska sold me the wrong ones even with a picture of the id plate that I sent them! Best check it out. The ones the sent were shorter and I caught it before I installed them.