Search:

Type: Posts; User: skander

Search: Search took 0.00 seconds.

  1. The problem was my splice on the power wire on...

    The problem was my splice on the power wire on the connector was not making good contact. I'm still scratching my head because it was soldered and shrink tubed and looked good, but something weird...
  2. Wow, this was an interesting check. I have 12 v...

    Wow, this was an interesting check. I have 12 v if I ground the multimeter outside of the fusebox and touch the multimeter to one side of the fuse receptacle (#17). Does this mean that the ground...
  3. I checked power to Fuse #17 the same way I...

    I checked power to Fuse #17 the same way I checked it to #18, by inserting the two multimeter leads into either side of the fuse receptacle. Fuse receptacle #18 shows 12 volts and fuse receptacle...
  4. Bulb failure, no power to under hood fuse #17

    Driver side low beam bulb failed.
    Decided to replace both sides with new H7 bulbs.
    Connectors on both sides had disintegrated.
    Spliced new connectors on both sides.
    Replaced bulbs.
    Now...
Results 1 to 4 of 4