that looks to be your CV boot. but I don't see the grease splattered everywhere that was inside of it.
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: boosted12a
that looks to be your CV boot. but I don't see the grease splattered everywhere that was inside of it.
check the connector for the bulb. they get brittle from the heat and dont connect so well
good service idea is to add some marvels mystery oil to the crank case a few hundred miles before you do an oil change. the mmo obliterates carbon. probably not the best idea on a really bad gummed...
not many screws that need to be un done. I think 4 in each wheel well to the rear and the two that hold the rubber stops at the bottom of the tail gate opening and 2 or 3 plastic nuts underneath....
could be a software problem too but that may only be for static on am
yes, the "caravans" are a common site in the us pulled by full sized usually diesel pick ups
I just replace as they go bad on my S80(same engine), ive done 2 so far and its a little over 100K on it.
Castrol gtlma is the way to go. ive used it for a long time on my rx7.
well between that and making the stock mufflers breathe a bit better it definatly has some more umph. it was free so.....
well, if you are doing your own work you will eventually need different size combo wrenches. just buy a set
I use h9 bulbs. they are 65w as apposed to 55 for the h11. you have to clip a small piece of plastic off the connector on the h9 bulb but they make a big difference. there is a video on you tube how...
18k and they had to be replaced already? wow! I just hit 20k on the 09. im gonna look at the breaks next oil change now. I got about 50k out of the front pads on my wifes 05 S80. on the current...
spanner? wishbone? what kind of jibberish is this? all joking aside, Volvo is great for changing hardware during a run of body styles. most times ive just seen the bolt head change size but ive seen...
not sure about your 07 but the 08 up have a very plush ride. my 05 S80 needed control arm bushings at about 80K and that did make the ride smoother. I have a little over 100k on it now and it is...
this worked on my 09
FCP? i only have 20K on my 09 so i havnt had to do brakes yet
welcome. i like that color combo on the interior and the outside.
so, I was looking at my air box the other day when I was checking my air filter. I noticed a rubber flap covering 2 holes on the inboard bottom of the air box. The flap is on the outside so im...
i went from an 03 forester to the XC. the fozzy was fun but the seats sucked
I have an 09 3.2. only problem I had with it is the module for the radio had to be replaced under warranty. the ride is great. the seats are awesome! the trans problems of the old AWD cars are not...
Not sure what the seats are like in your 07 but the ones in my 09XC are a lot more comfortable than the ones in my 05 S80. The leather is softer too. I hear the T6 with polestar is pretty schweet!
well, its better than the plastic. I didn't have 400$ to spend on the oem one
I hope most people will get the plate but for those who don't..
http://www.everydaynodaysoff.com/wp-content/uploads/2011/09/Muppet-Show-Swedish-Chef-Guns.jpg
I think the sway bar connects to the control arm, the sway bar will keep the control arm from coming down far enugh
did you disco the sway bar? that will help if you didnt