Hi, I have had to swap out my front bumper (fender) on my P2.
The replacement bumper has headlamp washer jets.
The original bumper had Headlamp wipers.
What parts will I need to plumb in the high pressure washer jets?
Thanks
Printable View
Hi, I have had to swap out my front bumper (fender) on my P2.
The replacement bumper has headlamp washer jets.
The original bumper had Headlamp wipers.
What parts will I need to plumb in the high pressure washer jets?
Thanks
The front bumper in American "English" is still the bumper not fender, which in UK English is the front wing.[thumbup]
My first question is will they even work when plumbed in. If the wiring is there for a pump, you could install a pump and hoses - but the CEM tells the pump to run. It does not run every time you wash the windshield. I would certainly test for power to the headlamp pump wiring when washing the windshield before trying to install the needed hardware.
The pump and wipers worked correctly for the removed bumper & wiper set up, but the washer jets work from a high power pump, not the low pressure one which is currently installed. Would the washer bottle need to be swapped out or is it the same bottle for both set ups with just a different pump?