Unfortunately there could be plenty of possibilities. 1.how and who checked your wheel bearings? You just jaked the car up and tried to move the...

If you want to do a proper "leak test" get yourself an OTC leak tester unit. It will cost $80 and you will need small compressor for the job. If you...

I would never ever put any cleaner into my coolant system. Some of those "cleaners" can be aggressive to aluminum and instead of getting some benefit...

Same as ASTRO, I am buying my ATF from Toyota dealer. i even bring that Toyota fluid to my volvo dealer and tell them to change it for me(when i am...

Everything is possible. Keep us posted on what you will find. Maybe even make a short clip and post on YouTube I case you will have questions

Any updates guys?

I am not sure why the numbers are different, unless one number supersedes the other. Body style is the same and mounting locations should be the...

Thanks for update. Agree that likely hoses, etm, boost valve are most likely not the problem. Any chance you had time to look over all the turbo...

It is hard to say what exactly is going on. Ideally it would be great to get the Vida and get specific codes, but not the case here. I would start...

I think you possibly have a worn fans. I believe they have 2 bearings which are prone to get "dry" and using brushes on the bottom. I recently had...

With all do respect for Mr ASTRO and his knowledge but I will allow myself to disagree on idea that cleaned injector is as good as new. It is a wear...

Your scenario is more concerning for possible fuel injectors leak. If you can remove the fuel rail so the injectors can be see and turn ignition...

If you have a Schrader valve in the fuel rail you are in luck. Go to the harbor freight and buy a check fuel pressure gauge. Connect it to the rail...