huzzsaba
06-28-2016, 10:23 PM
My 04 xc90 2.5t has 215k miles on it and the following has been replaced in the last three years:
control arms with bushings
ball joints,
inner and outer tie rods
stabilizer links
strut mounts (2 months ago)
spring seats. (2 months ago)
the only thing that hasnt been change is the front is the actual strut but when replacing the strut mount and spring seat, I inspected it and it looked good with no leaks the car passes the pushdown test.
when checking for play in the front end, there is none and the car tracks straight without any pulling in any condition. No unever tire wear either
What I do feels is that despite everything being replaced, the handling is not what it should be and there are random noise mainly at slower speeds or when going around bends in the road. Also the car does not feel planted, rather very floaty and the steering is not so crisp.
I am interested to hear if anyone has tried ipd subframe bushing inserts to see if that helps as well as if the vibrations from the polyurethane bushing inserts causes vibration. And if so, does the vibration die down eventually after some time.
thanks
control arms with bushings
ball joints,
inner and outer tie rods
stabilizer links
strut mounts (2 months ago)
spring seats. (2 months ago)
the only thing that hasnt been change is the front is the actual strut but when replacing the strut mount and spring seat, I inspected it and it looked good with no leaks the car passes the pushdown test.
when checking for play in the front end, there is none and the car tracks straight without any pulling in any condition. No unever tire wear either
What I do feels is that despite everything being replaced, the handling is not what it should be and there are random noise mainly at slower speeds or when going around bends in the road. Also the car does not feel planted, rather very floaty and the steering is not so crisp.
I am interested to hear if anyone has tried ipd subframe bushing inserts to see if that helps as well as if the vibrations from the polyurethane bushing inserts causes vibration. And if so, does the vibration die down eventually after some time.
thanks