PDA

View Full Version : Brake Module Code



hightest
12-18-2013, 01:19 PM
Hi - Got a new set of boots for my car today and while it was in the tire shop the guys read my codes and one came up...it is a Brake Module 0095 communication problem with OEM....any ideas as to what this is?

Antherzoll
12-18-2013, 02:17 PM
BCM-0095 Communication between control modules. Communication problems with Active on Demand Coupling
BCM-0095 Communication between control modules. Communication problems with the differential electronic module (DEM)

DEM is located on the haldex unit at the rear drive axels. You can check the fuse in the fuse panel in the rear cargo compartment, but it may be a bit more involved then that.

hightest
12-18-2013, 02:42 PM
Thanks Antherzoll....my awd works for a while and then stops working again...so I will check the fuse...hope that is it

ssicarman
12-18-2013, 07:44 PM
Likely not the fuse if it is working intermittently.

hightest
12-19-2013, 07:32 AM
You are correct ssicarman....I checked the fuses last night and all were good...took it into the dealer this am to see what they can see....will post once I get the call from them telling me how much I have to fork over to fix it...