PDA

View Full Version : Haldex AOC and Final drive service??



men2be
09-26-2013, 08:19 AM
I searched and best I can tell, it is recommended to fill both compartments with appropriate fluid and drain 100 ml. Is this correct?
Thanks!
2004 XC70

JRL
09-26-2013, 08:28 AM
Nope

men2be
09-26-2013, 08:32 AM
JRL would you please tell me what the proper procedure is?

JRL
09-26-2013, 12:11 PM
There is no Volvo recommendation, period

hoonk
09-26-2013, 02:58 PM
This may help


5467

JRL
09-26-2013, 03:04 PM
This may help


5467

He did not ask about the bevel gear (which the fluid should be changed every 60K or so).

men2be
09-26-2013, 05:32 PM
Thank you.


There is no Volvo recommendation, period

howardc64
09-26-2013, 07:33 PM
Per JRL, I think Volvo has no recommendation on changing Haldex AOC and Final Drive fluid. But if you really want to change the FD fluid (or say you had to change the seals etc..) Capacity is 500mL for 03+. Just fill through the filler hole until drip then backout 100mL. As for removing the old FD fluid, see here

http://howardsvolvos.webs.com/driveline.htm#660464972

Don't get carried away threading the vacuum pump hose into the FD. It can get cut by the sharp gear tooth, better to just leave some old fluid in there.

men2be
09-27-2013, 04:57 AM
Thanks Howard! Do you know if you backout for the AOC too?
I suctioned both with 1/4 od tubing. No problem there.


Per JRL, I think Volvo has no recommendation on changing Haldex AOC and Final Drive fluid. But if you really want to change the FD fluid (or say you had to change the seals etc..) Capacity is 500mL for 03+. Just fill through the filler hole until drip then backout 100mL. As for removing the old FD fluid, see here

http://howardsvolvos.webs.com/driveline.htm#660464972

Don't get carried away threading the vacuum pump hose into the FD. It can get cut by the sharp gear tooth, better to just leave some old fluid in there.

hoonk
09-27-2013, 05:02 AM
Sorry, gave you something you were not looking for. Please see attached -54725473

men2be
09-27-2013, 05:07 AM
Hoonk, That is just what I needed. Many thanks for your help!!
Be nice if it could be saved somewhere under maintenance procedures.


Sorry, gave you something you were not looking for. Please see attached -54725473