PDA

View Full Version : Hard shifting 2 to 3



genayaku
02-23-2012, 05:21 PM
2003 XC70 AWD 118K
I used to have this problem before, and went to dealer. I was told that the problem is in relay and it was replaced. The problem was resolved.
Since, my warranty is expired I would like to seek an advise from forum members in what kind of relay I should check/replace.
Any comments and suggestions are greatly appreciated!
Thank you and have a blessed weekend!

MacNoob
02-23-2012, 07:13 PM
B4 servo problem?

http://www.ipdusa.com/products/5538/30751262-b4-servo-cover-update

Astro14
02-23-2012, 07:38 PM
"relay" makes no sense to me...are you certain that's what the dealer said? Do you have the repair order to verify what was done?

With your miles (and zero other service, I suspect), I would simply change the fluid (see the Gibbons method under resources) and be certain you use the correct fluid (JWS-3309).

genayaku
03-08-2012, 06:18 PM
The fluid was changed at the dealer less then 6 month ago, so i doubt that's the issue. Will try servo option.
thank you for suggestions.

2008XC70
03-15-2012, 07:57 PM
They probably meant solenoids..

Astro14
03-17-2012, 04:52 AM
They probably meant solenoids..

Maybe...but that's a big job...over $1K in labor, so I suspect he would have remembered that correctly...maybe not...but changing solenoids on this is relatively pointless...they generally don't go bad, it's more often that the valve body that goes bad...

eitankon
03-22-2012, 11:56 AM
Usually dealers use a simple ATF . Got read of the old trani oil and used Toyota IV oil , and it runs smoother now.

Got the B4 parts and intend to flush the oil entirely and do the adaptive mode.

Hope this will solve 2-3 flares.

Eitan