SKL63
08-01-2011, 05:57 AM
Hi Guys.
Over the weekend I removed and repaired the ABS module as per well published documentation.
To remove the module more easily, I removed the turbo inlet hose (and it made the removal of the module almost trivial). However there is a short (maybe 4-5") elbow hose that pushes onto the turbo pipe at one end. Where does the other end go and how do you connect it. Any clues, because I am stumped and the car sits static in the driveway! Bummer.
They say a photo speaks a thousand words, so I have attached some.
The good news is that the module repair was very straight forward.
Over the weekend I removed and repaired the ABS module as per well published documentation.
To remove the module more easily, I removed the turbo inlet hose (and it made the removal of the module almost trivial). However there is a short (maybe 4-5") elbow hose that pushes onto the turbo pipe at one end. Where does the other end go and how do you connect it. Any clues, because I am stumped and the car sits static in the driveway! Bummer.
They say a photo speaks a thousand words, so I have attached some.
The good news is that the module repair was very straight forward.