fob battery replacement

[michaelgl1]

One of my two fobs battery is failing (message from the car). How do to change the battery on the fob?

[OKCXC70]

If you will kindly check the FAQ's for this forum, you will find you questions answered regarding a new battery for your key fob. Good luck.

[Jules]

Look on the back side of the fob, there is a very small indentation on the lower edge of the back plate, just enough to get a small pry bar (screw driver, kitchen knife, what ever you can find that works). Pop off the back plate, note the correct polarity of the old battery, and replace with the new. Snap the back plate in place, and your done.

Cheers
Jules

[Lotus99]

Look on the back side of the fob, there is a very small indentation on the lower edge of the back plate, just enough to get a small pry bar (screw driver, kitchen knife, what ever you can find that works). Pop off the back plate, note the correct polarity of the old battery, and replace with the new. Snap the back plate in place, and your done.

Cheers
Jules

There's actually two batteries for the PCC key. Instructions are here on page 60:

https://www.customers.volvocars.com/owners/docs/2008/2008_XC70/08xc70_02.htm#pg60