My bulbs arrived today. Very dumb question here. These have the Canbus attached directly to bulb, I’m assuming the resistor (arrives tomorrow) just...

Thanks for the response, and confirming my thoughts. Also, yes, I'm the same way and cleaned it all up with carb cleaner and a toothbrush before...

That’s where the PCV nipple is, so, yeah, oil vapor on that side of the manifold is normal. No worries. That’s not so gummed up as to affect flow,...

I’ll answer the question first - if the angle gear is dry, then, no it’s not urgent. Mine was always “damp”. So, I rebuilt it with new seals,...

Pardon Astro. I'll be sure to add the RTV sealant. My original intent was to just replace my front CV joint axles ( Passanger and driver)... ...

The PCV wasn't completely blocked, but was pretty close to being so. There is a noticeable increase in the amount of vacuum when performing the...

How was your PCV system? Was it gummed up? I did mine recently and it was pretty bad but the intake manifold was evenly clean. However, my...

One easy way to get the broken nozzle out is to screw in a small wood screw, and, when it grabs, withdraw it with a pliers.

I can’t tell, from those part numbers, what you’re doing. If you’re just doing the angle gear, cool, but you still need to get the anaerobic...

A write up is not really required beyond the normal painful process of changing bulbs in the XC70. Both the LED bulbs and the resistors come with...

Here are the seals. Thanks to all of those that helped. Volvo Drive Axle Seal Corteco logo- SKU: CTO-01034061B In Stock $3.99 1

I believe I've already replaced the seal you're describing when I replaced the front wheel bearing. At the moment, I have a parts diagram with the...

Thanks for posting that link! If you install the device, please let us know if it works.

Are you aware of any good write ups on performing this upgrade? Thanks!

Are you referring to the Axle seal? Volvo/FCP calls it "Volvo Axle Dust Sealing Ring". That's the only seal I've seen while working on axles (I've...

[Hi Astro, Currently ( Knock on wood), my angle gear isn't leaking. I was thinking I would just need to replace two seals, one on the left and...

Just curious if you have an update on what you tried or if anything worked for this Project? My trusty 2002 V70XC with 315K miles on it is literally...

At that mileage, you might consider replacing the collar sleeve. Angle gear has to come out, so you might as well do the seals on it. You can get...

I replaced the spark plugs with the appropriate Bosch type...This appears to have solved the problem. Thanks to everyone who commented.

I had a lot of trouble with directional stability and a slight fade to the left when braking after replacing LCA bushings. I mounted a GoPro under...

Finally received my part and was able to fix my rear wiper sprayer. Thank you to everyone who gave the tips and help. Just want to help out anyone...