"New" style fuel line/rail connector O ring

[olevolvo]

Anyone have instructions for the o ring install on the fuel line/rail connector. It must have popped out when I took it off. Thanks!

[Astro14]

There’s an o-ring?

I don’t recall ever seeing one...

[goldxc70]

Here: https://www.ipdusa.com/products/7754...volvo-30677229

I changed mine from the old to the new style a few years ago as I suspected a leak there. As far as I can remember, there is nothing complicated about putting it together.

[olevolvo]

Here: https://www.ipdusa.com/products/7754...volvo-30677229

I changed mine from the old to the new style a few years ago as I suspected a leak there. As far as I can remember, there is nothing complicated about putting it together.

I took the three torx bolts out and opened the injector rail. The black plastic fitting came out and the o ring sits on top of the fitting. Found to get it on and sealed, I held the steel fuel line "up" with vice gripes and pushed it down with a lot of pressure. All good! And thanks for the replies!

[Astro14]

Ah. Now I see. I’ve got the old style. The new style clearly has an o ring.

[goldxc70]

Ah. Now I see. I’ve got the old style. The new style clearly has an o ring.

I think the old style has an o-ring as well but it's "contained" inside the fitting. If my memory serves .... it's a few years since I changed the fitting.