According to VADIS:
Removal
- Ignition off
- Remove upper and lower steering column covers
- Remove two screws for the switch
- Remove the rubber boot
-NOTE! The pins on the switch are fragile
- Carefully pull the switch straight out
Installation
- Install the rubber boot
-NOTE! The pins on the switch are fragile
- Insert the switch straight in from the side in the correct position. Carefully press the switch into the micro-switch. Ensure that the pins are in correct positions in the micro-switch
- Install the screws for the switch
- Install the upper and lower steering column covers
Bill
63 PV544 (attempted restoration)
83 245 DL OSD (transferred to son)
85 240 GL OSD (transferred to son)
03 XC70 OSD (traded-in 4/12)
05 AWD S80 OSD (transferred to son)
12 XC70 T6
16 S60 T5 Drive-E (FWD)
Bookmarks