Update, so the code is the P0336. I checked all marks and hoses, so now it o ly cranks but it won't start.
home | news | features | forums | product reviews | resources | photos | marketplace | contact |
Type: Posts; User: surfercalavera
Update, so the code is the P0336. I checked all marks and hoses, so now it o ly cranks but it won't start.
Hi, I just replaced the timing belt with the IPD kit. Now the car won't start. I plugged the OBD and gave the Camshaft sensor issue. Any suggestions on how to approach this? 2004 XC70 with 230k miles.
Hi, I have an '07 AWD with V6 107K miles. It has started to hesitate a little, very subtle, from what it feels like changing gears from 2 to 3. When accelerating hard, it stutters but runs fine...
I have an 2004 xc70 with 200k, absolutely love it. A new member has been to our family and now I need the bigger model. Any advise will be much appreciated.
I have a 2004 XC70 with a malfunctioning tailgate lock. It locks but will not unlock. I have removed the panels and looked at the lock but everything mechanically seems ok. I am wondering if a...
On my last trip to Tahoe, while stuck on the shoulder trying to make a u turn, and after I burn half my front tires, I realized that the rear wheels were not turning. The rear differential was not...
Hello, not sure why one of my wheels has lost its nice sheen. Is there a known compound that can be used on this type of rims?
04 XC70
Thanks!
7715
I tried it bleeding it with the wheel on the ground. Should I do this with the wheels off the ground? Also, do I need to take the cap off while I am doing this to let the air go out?
Here is the...
I have an 04 XC70, the power steering was making noises so I bought an aftermarket replacement from IPD USA.
I replace it this weekend and now the noises are gone, but when the car is no moving it...
I am having the same issue with my 04. Slow coolant and oil leak by the timing belt side. Looking forward to hear more about this. Thanks.
Ball joints, inner and outer tie rods, were replaced in the last year. At the time this issue was subtle, but it has gotten really bad now.
I have taken it to the shop to no avail.
Hi, I have aan 04 that is doing something strangenow.
When I make a left U turn (slowly), the steering becomes loose at the leftmost turning point and feels like it locks and I have to quickly...
2004 XC70
I am gathering information on how to replace both sides. I looked under and it looks like a lot of work to get both out.
Questions:
1. Do I need to get the sway bar out of the way?...
My advice is to get the engine and transmission checked out by a professional before any upgrades/fixes, once that is clear you can start the fixes and upgrades. It might be too late to say, but if...
I have an 04 XC70 and when I put it in "park" at a low incline, the car lightly rolls. I am in the San Francisco Bay Area, there are lot of hills, so I am concern as to why it rolls, I have three...
I am just wondering what the symptoms for bad end links are.
When I sit in the back, and some one else is driving, the car moves too much from side to side, makes me nauseous. The front is not as...
I have an 04 XC70, the driver's side has burnt about three bulbs within a year and just last week it burnt no, 4. This time though, the housing from the wire that connect to the bulb desintegrated....
I am with 09xcnewyork, I would also like about 1-2 inches more for my surf scapes trips, but I think the XC was precisely made for its niche. The Trooper will do.
Same here, I replaced the pcv system and did not required this tool. I simply added some wd-40 around each injector and wiggle it with care, and they all pop up.
Yes, I have heard the same, the control arms looked good and still look ok, but I want everything replaced now--that's why I decided to do it in the next few months--more work for me!
I replaced almost the whole front suspension. The total damage so far is about $600-strut kit from FCP, inner&outer tie rods and ball joints from IPD-with the end links and control arms still...
Howard,
Yes knuckle came off, and will check for rubber seal.
Inner and outer rods were changed in early January.
I want to add that I alignment has not been done yet, I know, but i have...
2004 XC70 with 160K miles, I have replaced the following in the last month:
- Inner tie rod
- Outer tie rods
- Ball Joints (two weeks ago)
- Front Struts kit (bearing, bellow, stops, bumps, etc...
Make sure the "W" button is not pressed while driving over 40MPH.
I think it stands for Wet/Winter mode.
I used about oyota type IV in all three flush, and have never actually used the mobil.
My xc has 170K and trans is good. Go for it.